Bob’s Chimney

Affordable Chimney Flashing Repair in Boston

A damaged chimney flashing means unrestrained rainwater entering the area where the chimney meets the flue. If your chimney’s flashing is damaged, let our professionals repair or replace it fast. 

Chimney flashing leak repair in Boston. 

Dealing with an Old Flashing? Let Us Repair It To Prevent Water Damage

Every part of the chimney plays a role in protecting it from damage. When it comes to the flashing, its main purpose is to create a watertight seal between the chimney and the roof. If the flashing isn’t installed properly, though, you may notice water slipping through and damaging the roof, shingles, gutters, attic, and interior walls.  

At Bob’s Chimney, we address these problems head-on through chimney flashing repair in Boston, MA. We have the tools and hands-on experience in fixing flashing materials of all kinds, helping homeowners prevent leaks and water infiltration. If you’re looking for a long lasting solution for your chimney’s structural integrity, we’re the ones you should put your trust in. 

Let our chimney experts repair flashing around the chimney through time-tested techniques. Book your slot for chimney flashing repair in Boston today. 

Bob’s Chimney

What are the Chimney Flashing Repair Costs in Boston?

If you’re wondering about the cost of repairing a damaged chimney flashing, the answer can vary depending on your specific situation. Minor fixes, such as sealing small cracks or patching damaged sections, are usually less intensive. However, if the flashing is significantly deteriorated and requires a full replacement, the work involved, and the cost, can increase. Several factors can influence the final price, including the extent of the damage, roof accessibility, the type of materials needed, and whether additional repairs are required.

  • The age of the chimney
  • The size of the chimney
  • The flashing material (i.e., copper, steel, aluminum, etc.)
  • The complexity of the roofing design
  • The level of damage

Need a no-obligation quote for how much it costs to schedule fireplace flashing repair in Boston? Call us to know more! 

Roof flashing repair services. 

We Repair All Types of Chimney Flashing

01

Step Flashing

Step flashing is installed around the chimney in a step-like pattern, containing different layers of shingles. We fix damaged sections and address improper installation to prevent water leaks.  

02

Base Flashing

As the name suggests, the base flashing sits at the ‘base’ or bottom of the chimney, where the roof meets the vertical surface. We repair deteriorated sections to restore the flashing’s strength. 

03

Counter Flashing

The purpose of counter flashing is to seal the top edge of the lower flashing components. It overlaps with the base flashing, creating a tight seal. We tighten this seal in case it’s loose or damaged. 

04

Cricket Flashing

This is installed behind large chimneys that are wider in length. They divert rainwater to prevent pooling. We seal any gaps using roof cement and polyurethane caulk to maintain a watertight seal. 

05

Copper Flashing

Copper is a high-end material for flashing because of its rust corrosion, but it can still rust after heavy usage. We remove oxidation to restore the flashing’s strength and reinforce its installation. 

06

Galvanized Steel Flashing

Galvanized steel is a budget-friendly material for flashing, but it can corrode if it is not maintained properly. We repair salvageable metal flashing and offer a replacement if it’s beyond repair. 

Is your chimney’s masonry discolored because of repetitive water exposure? Let us fix chimney flashing to stop this. Book your slot with us today! 

(857) 930-7706

Sealing your roof and chimney. 

Our Professional Process for Installing New Flashing

STEP 01

We begin with an inspection of the existing flashing as well as the surrounding roofing materials for any signs of damage. 

STEP 02

If required, we loosen the previous pieces of the flashing and also remove the shingles to prepare for the repair process. 

STEP 03

We use tools like diamond blades or circular saws to create grooves in mortar joints, allowing us to add new flashing. 

STEP 04

Once the new flashing has been installed properly, we secure it tightly with roof cement, caulk, nails, and a sealant. 

STEP 05

If any issues are found, adjustments are made as needed. In cases where the entire flashing needs to be replaced, the scope of the work becomes more extensive.

Prevent Leaks and Water Damage by Repairing Your Damaged Chimney Flashing!

(857) 930-7706

Signs of flashing damage. 

How to Know If My Existing Flashing is Damaged?

Here’s a detailed list of the signs you need roof chimney flashing repair in Boston: 

  • Damp areas, water stains, or leaks near your fireplace or interior walls, especially after rain.
  • Rust, corrosion, or discoloration on metallic flashing made from copper, aluminum, or steel.
  • Lifted, bent, or cracked flashing. This usually means the flashing is not forming a tight seal.
  • Missing caulk around the chimney flashing, which means a lack of protection against water.
  • Damage to the roofing materials near the chimney flashing, like shingles or roof deck.
  • A stubborn, rotten smell coming from your attic area – a telltale sign of water intrusion.

Noticing any of these in your home or office? If you said yes, call us to schedule roof chimney flashing repair in Boston. 

(857) 930-7706

FAQ’s

Frequently Asked Questions

Professionally installed chimney flashing can last up to 20-30 years. We recommend maintaining your flashing regularly to make the most out of its lifespan. 

Copper is generally considered the best material for chimney flashing because of its corrosion resistance and long life. Aluminum and galvanized steel are also viable options if you’re looking for something a little easier on the wallet. 

Regular maintenance is key. Consider scheduling annual inspections to identify any problems in the chimney flashing or other components.